E-Collar Dog Collar Design
The E-Collar Collar fits comes in 3/4″ widths and 1″ widths. Please make sure that you are ordering the CORRECT WIDTH for your e-collar receiver as different e-collar models require different widths.
Collars come with a roller or collar buckle, are adjustable, and waterproof. Collars are made with stainless steel or solid brass buckles and Chicago screws.
- 3/4″ or 1″ roller or collar buckle
- 3/4″ or 1″ D-Ring
- Hardware finish in stainless steel or solid brass
- Chicago screws that are also secured with thread locker
Proper Sizing For The E-collar Dog Collar
First make sure that your e-collar receiver fits the correct width strap!
Also, please be aware that the straps fit the collar VERY tightly, so it takes some effort to slide the webbing into the receiver.
Then measure your dog’s neck with a soft tape measure to find the right collar size. The tape measure should be high on the neck where the e-collar is placed and very snug. Please look at the 3rd photo to make sure you are measuring correctly.
Choose the drop down size that matches the measurement for your dog’s neck size from your measurement above.
The collar will be designed with the extra length needed to fit the receiver box onto the collar. If you have an old e-collar collar DO NOT measure the length from the hole you used without the box on the collar…this will result in the wrong measurement. Please choose your dog’s ACTUAL neck size from your earlier measurement and we will make the calculations for the length needed for the receiver.
Each collar has 5 holes that are half an inch apart. The middle hole on the collar will be the neck length you chose and there will be 1″ on either side for best fit. So a 16″ collar will fit 15″-17″ neck sizes and allow space for the receiver placement.
If your dog is still growing check the “growing dog” option. We’ll start the first hole at the puppy’s current neck size and add 4 extra 1/2″ holes. Ex; puppy’s neck is 16″, the puppy e-collar collar will be from 15.5″-19.5″. If you still need more holes, please contact us!
- Webbing on the inside and heavy-duty, non-tacky PVC coating on the outside
- Cold weather resistant (won’t become brittle until -56° F)
- UV resistant (won’t fade)
- Sensory friendly: won’t hurt your hands like rope leashes or nylon leashes
- Doesn’t tangle or knot easily
- Will not crack or fade
- Doesn’t need to be oiled
Collar Hardware Information
All of our e-collar dog collars are available in stainless steel and solid brass.
To prevent the hardware from oxidizing it’s best to dry your product ASAP, and to especially rinse off any saltwater. In the case that your hardware rusts or patinas, we recommend searching Google for the best methods to remove the discoloration (methods are different depending on which metal you chose).
To clean your collar, take a bucket of water (temperature doesn’t matter), and add some dish soap. Then swish the collar around in the bucket, rinse clean and allow to air dry. For more stubborn areas use a gentle wet cloth and rub with a bit soap and rinse clean.